Fender roller

[RoMe]

Does anybody have one? Or know anybody that does :thumbup:

[stevieg]

use a baseball bat lol J/K!

[AWDMadness]

I need to roll mines as well, but I'm actually thinking about cutting them instead...hmmm

[RoMe]

Id be down for that any wheel and tire combo that I have put on the 92 so far has rubbed but this time its worse.

[pdexta]

We seriously need to invest in a FMR fender roller, haha. I'd be willing to chip in.

[03scgt]

ive done a few with a baseball bat and a heat gun.a soft mallet and a heat gun and a razor is the best way.id be glad to help out and do a few sets if anyone wants.a eastwood fender roller is only 125$ though

[DjNando]

Sexy ass sig Ant.

[03scgt]

Sexy ass sig Ant.


thank ya.i have about 15 of them but can decide on them an di have to keep resizing them

[RoMe]

Alright so who's in? I want/need to get this done by next week im gonna look at renting vs buying a roller.

[03scgt]

Alright so who's in? I want/need to get this done by next week im gonna look at renting vs buying a roller.


theres one for rent usually in the paper.

[burny850]

i used a heat gun and a rubber mallet 4 my bucket of shit

[pdexta]

Alright so who's in? I want/need to get this done by next week im gonna look at renting vs buying a roller.

I'd be willing to throw in some money to get my piece rolled. Let me know how much it's gonna be.

[AWDMadness]

I've never done it, I kind of know the steps, but is it hard?

[JP]

I know atleast some of you are also on NR. You might want to talk to trueblue02. He used-to do custom body work for a living and is damb good at it. He'll usually take on some quick side work if he has time. mpx Phil knows him, he's the PC Snap-On dealer.

[Only_In_A_Domestic]

i know a guy i can rent a roller from

[burny850]

o word. get it son

[Only_In_A_Domestic]

people get me the money and ill call him up

here is his page http://docs.google.com/View?docid=ddnpm9xz_37qfn3zr2

[Only_In_A_Domestic]

250 deposit
and 50 bucks to rent for a week and i think 25 for every week after

[AWDMadness]

not bad I guess if everyone pitches in, but I know someone who got their fenders rolled for $30 a fender somewhere in broward...yes I know, quite a drive lol

[pdexta]

So he's not local I guess? Someone should just put up the money and then let people use it for like $40 a piece. That way everyone gets a good deal and hopefully whoever put up the money actually turns a little profit for their time and investment.

[03scgt]

lol 30$ a fender will buy you a Eastwood fender roller.just everyone put In and moose will do all the leg work

[pdexta]

lol 30$ a fender will buy you a Eastwood fender roller.just everyone put In and moose will do all the leg work

Find me a $125 eastwood fender roller and I'll buy it... then I'll lick your balls and roll your fenders for free. :ugh2:

I'm thinking about just buying one, the cheapest I've found is $219 + shipping.

[Only_In_A_Domestic]

lol 30$ a fender will buy you a Eastwood fender roller.just everyone put In and moose will do all the leg work


word



and yes the eastwood ones are good, and about 250

[03scgt]

Find me a $125 eastwood fender roller and I'll buy it... then I'll lick your balls and roll your fenders for free. :ugh2:

I'm thinking about just buying one, the cheapest I've found is $219 + shipping.

when I get home I'll give you the link sweetcakes

[AWDMadness]

lol oh god, if Anthony really finds this link and proves Scott wrong, will Scott end up doing what he said he'll do?? the results!!....coming to a forum near you

[pdexta]

:yumyum:

[03scgt]

Scott shaved or prickly?

[AWDMadness]

:rofl1::rofl1:

this is too funny!!

[Acuracy]

:rofl1: Oh damn scott... yous gonna get pwnt.

[STiDriven]

Scott shaved or prickly?

Scott doesn't mind it natural. :rofl1:

[burny850]

Scott doesn't mind it natural. :rofl1:


true that brotha

[frank]

Scott doesn't mind it natural. :rofl1:

true that brotha

I just threw up a little.

[pdexta]

Scott shaved or prickly?

Where's the link???

[03scgt]

Where's the link???


im looking sweet cakes i just saw it like 2 days ago

[RoMe]

Ok prob fix. Went to HD bought a $4 rubber mallet and a heat gun for $70 (which will be back at HD Tomm) and no more rub. That was a lot easier than I thought. I only manager to chiped the paint in the inside of the fender other than that it came out great.

[03scgt]

Ok prob fix. Went to HD bought a $4 rubber mallet and a heat gun for $70 (which will be back at HD Tomm) and no more rub. That was a lot easier than I thought. I only manager to chiped the paint in the inside of the fender other than that it came out great.


i told you that ish was easy

[AWDMadness]

Ok prob fix. Went to HD bought a $4 rubber mallet and a heat gun for $70 (which will be back at HD Tomm) and no more rub. That was a lot easier than I thought. I only manager to chiped the paint in the inside of the fender other than that it came out great.


was it easy? Damn man, I have a heat gun and a rubber mallet at home. I'll try it if you say its easy.

[AWDMadness]

i told you that ish was easy

done, tomorrow I'm trying mine

[frank]

So, I'm guessing no FMR roller anymore.

[pdexta]

NOOOO! I still wanna get one. I think my fenders are gonna need more than a rubber mallet.

Still waiting on Anthony to post that link... I'm keeping my lips moist.

[Victor]

NOOOO! I still wanna get one. I think my fenders are gonna need more than a rubber mallet.

Still waiting on Anthony to post that link... I'm keeping my lips moist.


If you get one come by my place and do them on the Supra lol.

[pdexta]

If you get one come by my place and do them on the Supra lol.

Drive it over here and I'll do um for free. :tongue:

[AWDMadness]

^hahahahaha

[frank]

Drive it over here and I'll do um for free. :tongue:

Owned.

[pdexta]

I went ahead and bought one. Once it's here I'm gonna flare the gay blue miata and roll the dark blue one for some practice. Assuming that goes well I'll do other peoples for $40, unless it turns out to me a lot more work than I'm expecting, haha.

So let me know if someone still wants their car done. :thumbup:

[AWDMadness]

o chit, $40 for how many fenders?

[pdexta]

Well I'm plannin on $40 for all 4... unless it takes a hell of a lot more work than I'm expecting. Not tryin to get rich or anything, just wanted to offset the price of the roller a bit.

I'm gonna have to join up on dub militia and try to convince those guys to let me roll their fenders so they can fit some 205's on those 10 inch wheels. :rofl1:

[Only_In_A_Domestic]

sounds good

[amimaxima]

i used to have one but got rid of it

[pdexta]

i used to have one but got rid of it

That's good, b/c I'd be forced to kill you if you said you had one immediately after I spent $250 on one. :tongue:

[amimaxima]

I can get it back if i wanted to

[03scgt]

lol Scott is gonna cry

[pdexta]

I can get it back if i wanted to

I don't really understand what the point in you saying this immediately after I buy one...

Just trying to be a douchebag I guess... Congrats, you're doing a great job. :ugh2:

[amimaxima]

how the f was i supposed to know you just bought one?

[pdexta]

how the f was i supposed to know you just bought one?

Maybe by reading the damn post right above yours you fuckin assclown. We've been talking about getting one for 3 damn days. Finally I say:

I went ahead and bought one...

And you're douchbag piece of shit ass comes on here bragging about how you had one, but you got rid of it. So I say:

That's good, b/c I'd be forced to kill you if you said you had one immediately after I spent $250 on one. :tongue:

Then your faggot ass has to come back bragging that you could get it. There's no fuckin point. If you wanna be a piece of shit and not let anyone use something, fine, nobody really gives a shit, what goes around comes around. But don't come on here bragging about how you could have gotten it but instead you made me go spend 250 fuckin bucks just so you could be an asshole.

Now you wanna act like you didn't know I just bought one. Dumbass... what the fuck were you responding to if you didn't know? I just fuckin said it. Nobody else here has fuckin reading comprehension problems, it's not me dude, it's you.

FUCK OFF YOU RETARDED PIECE OF SHIT!

[Deuce40]

http://www.youtube.com/watch?v=Wxmw-4A0DEQ

[03scgt]

holy shit scott chill the fuck out

[pdexta]

:D

[amimaxima]

you have fucking issues

[poon]

Hahahaha, wow.

[AWDMadness]

http://www.youtube.com/watch?v=Wxmw-4A0DEQ


I don't think I have the guts to do the rear ones like that lol

[Only_In_A_Domestic]

lemme know when you get good at it scott and i will be visiting you for your automotive services

[amimaxima]

http://i148.photobucket.com/albums/s18/absoundlab/PICT5191.jpg
http://i148.photobucket.com/albums/s18/absoundlab/PICT5181.jpg

[pdexta]

lemme know when you get good at it scott and i will be visiting you for your automotive services

Will do man, it should be here in a few days. I might have to drive out to victor's house. If I get pictures of a supra that I rolled that's the stuff a resume is made of right there, no one will be able to question my mad tyte skillz :rofl1:

[Victor]

Will do man, it should be here in a few days. I might have to drive out to victor's house. If I get pictures of a supra that I rolled that's the stuff a resume is made of right there, no one will be able to question my mad tyte skillz :rofl1:


So what you are saying is you will drive out to lehigh and do it for free?






























:rofl1::rofl1::rofl1::rofl1::rofl1::rofl1::rofl1:: rofl1::rofl1:
:rofl1::rofl1::rofl1::rofl1::rofl1::rofl1::rofl1:: rofl1::rofl1:

























No really. :mad:

[pdexta]

If I still need a resume booster after doing the miatae, maybe :D

[Only_In_A_Domestic]

lol

[AWDMadness]

lol....let me know when you feel confident using it :)

[amimaxima]

its not that hard to use

[AWDMadness]

^lol I kindof figured it wasn't. I just never done it before, so I wasn't too sure.

[pdexta]

She's here! Wooo hoo, pics later.

[AWDMadness]

have fun :)

[pdexta]

I did one wheel, it wasn't as much fun to do as I was hoping it would be. I think if you were just needed a little clearance it'd be pretty easy to do and not much risk of hurting anything. I tried to really roll/stretch the fender and got some cracks in the crease, but the car has a really crappy maaco paint job and is crackin all over the place already so that wasn't much of a surprise. I wish the car was running and I already had some fat tires on there so I could see how much it helped.

[03scgt]

Use a heat fun or even a hairdryer scott .it'll warm the paint enough to let it bend without cracking

[pdexta]

...or even a hairdryer

Why do I feel like you're mocking me... :rofl1:

[03scgt]

lol I diddnt think of that.well just stick to a heatgun

[AWDMadness]

I have a heat gun if you want to borrow it?

[pdexta]

Thanks for the offer, I appreciate it, but that's alright. It's on the inside where you can't really see it and I'm not real concerned about the paint anyway.

[AWDMadness]

who's next? :tongue:

[Only_In_A_Domestic]

ill go fourth

[pdexta]

I'll practice on the other 3 fenders later, haha. Chris, are you rubbing now?

[03scgt]

ill need mine done but the car is for sale.if it doesnt sell this month ill need it done

[Sloww]

ill need mine done but the car is for sale.if it doesnt sell this month ill need it done

i thought you were fixing it and keeping it?

[03scgt]

http://fortmyers.craigslist.org/cto/951862994.html

[AWDMadness]

:(

[Only_In_A_Domestic]

I'll practice on the other 3 fenders later, haha. Chris, are you rubbing now?


no but thats on full stiff

i kinda wanna be able to roll around town with killing my spine

[pdexta]

no but thats on full stiff

i kinda wanna be able to roll around town with killing my spine

So if it's on sawwwwfffppttt you do rub? If you wanna swing by today after 5pm we can roll them if you want. I'm anxious to roll a car that actually needs it. If ur busy then, I'm pretty sure I'm gonna be sick tomorrow *cough cough*, so I should be home pretty much all day, we can do it then.

[Semi Jew]

i need fenders rolled on both cars yo.

[Only_In_A_Domestic]

So if it's on sawwwwfffppttt you do rub? If you wanna swing by today after 5pm we can roll them if you want. I'm anxious to roll a car that actually needs it. If ur busy then, I'm pretty sure I'm gonna be sick tomorrow *cough cough*, so I should be home pretty much all day, we can do it then.


lol i gotta work tonight

i wanna use a heat gun because i wanna roll them and push them out as far as can be

some focus people have pushed about an extra .75 inch

[pdexta]

lol i gotta work tonight

i wanna use a heat gun because i wanna roll them and push them out as far as can be

some focus people have pushed about an extra .75 inch

Damn that's awesome.

[Only_In_A_Domestic]

got any more practice yet?

[pdexta]

I did another wheel, so I've got a little more practice. Eric has it now, he's rollin his fenders. I feel pretty confident that I could roll the fenders w/o doing any dammage. I just wouldn't go too crazy with it. If you're gonna do it yourself, you can go as crazy as you want. :)

[Only_In_A_Domestic]

nah ill do it with you... just wanna get a heat gun from someone


maybe if we dont go to late sunday or something

[pdexta]

Sounds good.

[AWDMadness]

its harder than it looks!

[AWDMadness]

http://www.youtube.com/watch?v=PqiTfYyaI1A


I might be a little too impatient, that might be the problem...


*edit* its so simple even 4 yr old can do it :(

[Only_In_A_Domestic]

lemme know scott.... saturday??

[pdexta]

i'm home now if you're available.

[Only_In_A_Domestic]

Nah. U good for tomorrow. If you got the heat gun I'll swap wheels tonight

[pdexta]

Nah. U good for tomorrow. If you got the heat gun I'll swap wheels tonight

I got plans for tomorrow. I can give you a call when I get home if it's not too late. Sunday would probably work too.

[Only_In_A_Domestic]

k I get off Sunday at 2

[pdexta]

:SolidStraight: