PDA

View Full Version : Help! 240 noises???

Inzane089
February 6th, 2009, 06:51 PM
Yo guys im new so i was wondering if i could get some help. my 240 runs but for some reason it makes a ass load of noises... especially from the transmision like as if the clutch was rattling. and i donno what it is. by the way the clutch is brand new. any ideas guys?
SupaMan89
February 8th, 2009, 12:47 AM
Need to narrow the "assload of noises" down a little bit and its almost impossible to tell over the internet, See if one of the local 240 guys can meet with you can take a look.
Kevin
February 8th, 2009, 12:49 AM
Did you check the blinker fluid?
03scgt
February 8th, 2009, 02:33 AM
Did you check the blinker fluid?


word my mustang had a problem with that
LUMBER BLACK
February 8th, 2009, 01:17 PM
Assholes :)
arcticlt
February 8th, 2009, 02:09 PM
Does said noises go away when you press the clutch in?
frank
February 8th, 2009, 02:25 PM
Definitely sounds like the flux capacitor.
96ekhatch
February 8th, 2009, 02:35 PM
I always found the easiest way to find out a sound is just to keep driving till it completely breaks. Then there is no guessing required.
RoMe
February 8th, 2009, 02:38 PM
Shit Bro I could get you blinker fluid for the low but its sold out right now sorry man

http://kalecoauto.com/index.php?main_page=product_info&cPath=2&products_id=6
RoMe
February 8th, 2009, 02:42 PM
And for my boys with the SRT-4's with mad horsepowas and torque steer BAM!

AWD conversion kit son!
http://kalecoauto.com/index.php?main_page=product_info&cPath=6&products_id=38
03scgt
February 8th, 2009, 04:38 PM
Yo guys im new so i was wondering if i could get some help. my 240 runs but for some reason it makes a ass load of noises... especially from the transmision like as if the clutch was rattling. and i donno what it is. by the way the clutch is brand new. any ideas guys?

Does said noises go away when you press the clutch in?



probably the throw out bearing if it goes away when you press the clutch in
Bfreefl
February 8th, 2009, 06:08 PM
check the connotering pin first if not its definitly the muffler bearings
Bfreefl
February 8th, 2009, 06:15 PM
NO! I figured it out its the piston return springs
EvilGrinner
February 8th, 2009, 07:39 PM
It's a Nissan...that's the problem.
Hazzvd?b
February 8th, 2009, 07:40 PM
it's the filanges obv
rotodouche
February 8th, 2009, 07:48 PM
hmm. you might have squirrels in your transmission. id definately check for that. they made ''ass load'' type noises.


lol im just fuking with you, i have no idea. gl with that. is it KA or SR?
Igor
February 8th, 2009, 11:56 PM
ok seriously, WHAT THE FUCK.

he asked for help becasue he was having problems with his car - THIS IS THE FORUM TO GET ADVICE ABOUT THIS SHIT - not for you guys to be dicks.
amanda
February 9th, 2009, 12:17 AM
ok seriously, WHAT THE FUCK.

he asked for help becasue he was having problems with his car - THIS IS THE FORUM TO GET ADVICE ABOUT THIS SHIT - not for you guys to be dicks.


we woulden't be dicks if he gave us something more than "an assload of noises" to diagnose the problem. eveyrones being helpful, maybe it was the blinker fluid OR the piston return springs. SO ONWARD WITH THE DIAGNOSIS DOCTORS
EvilGrinner
February 9th, 2009, 12:35 AM
The roller rocker in the transmission is bent? That's my new guess. Well that and it still being a Nissan.

Honestly, with the info given all we know is that there is a 240 with "an assload of noise", and most of it seems to be coming from the trans. That's it. Igor, I'm not trying to be a dick but stupid posts get stupid replies...especially from the people here. Have you not seen what happens to the noob's who mess up the intro? Look, as a Nissan and S chassis owner I'd to help this guy out but without good info that's kinda hard.
03scgt
February 9th, 2009, 12:45 AM
ok seriously, WHAT THE FUCK.

he asked for help becasue he was having problems with his car - THIS IS THE FORUM TO GET ADVICE ABOUT THIS SHIT - not for you guys to be dicks.

seriously? dude chill the fuck out,your acting like a 60yr old jew lawyer with a murder trial coming up.he diddnt give info and thats what he got,people (myself included) gave him a smart ass answer and a real answer.
amanda
February 10th, 2009, 02:37 PM
baby fetus
frank
February 10th, 2009, 02:54 PM
baby fetus

Great now I'm hungry.
amanda
February 10th, 2009, 02:57 PM
Great now I'm hungry.

basically. i'm going to panera wheeeee
frank
February 10th, 2009, 03:23 PM
I ate some cookie dough instead.
Inzane089
February 12th, 2009, 06:45 PM
guys i figured out the noise.... its the flywheel. its loose and im pretty sure its rattleing on the bell houseing... anyone know the best way to get it done or how much it would cost to get it fixed? and where i could get it done for cheap?
03scgt
February 12th, 2009, 07:00 PM
guys i figured out the noise.... its the flywheel. its loose and im pretty sure its rattleing on the bell houseing... anyone know the best way to get it done or how much it would cost to get it fixed? and where i could get it done for cheap?

lee county transmission is pretty cheap and they do great work.how did you figure out it was the flywheel?
Inzane089
February 12th, 2009, 07:07 PM
got under the car, and bent up the pressure plate. i rebuild the whole thing so i didnt have the mounts on under there :X i then felt up under there and i could wabble the pressure plate.



thanks for the info 03scgt
EvilGrinner
February 12th, 2009, 07:49 PM
Glad to see you got the problem figured out.
Inzane089
February 12th, 2009, 08:01 PM
yeah me to! im gonna get it fixed and Tony G. might be helping me.
marco
February 14th, 2009, 12:30 AM
vtec solonoid for sure.