PDA

View Full Version : HELP honda bseries help

Bfreefl
February 9th, 2009, 12:54 PM
ok so as most of you know the honda got ripped i got aall the parts and everything in the car i just recently bought a virgin p28 plugged it in and was ready to drive, well the car wouldnt start, at first there was nothingg i left it plugged in for a while then i turned the key and it turns over fine, just doesnt seem like its getting fuel and or spark, my last ecu i could touch the key and my fuel pump would kik in to get to 26 psi of fuel but now nothing, i just needd some input please thanks guys
Ej1_sleeper
February 9th, 2009, 04:18 PM
is your fuel pump priming? when you turn the key do you hear the hum before you try and crank it? if not check your main relay. As for spark test out your dizzy to make sure your getting spark from it.
Bfreefl
February 9th, 2009, 10:48 PM
is your fuel pump priming? when you turn the key do you hear the hum before you try and crank it? if not check your main relay. As for spark test out your dizzy to make sure your getting spark from it.

no it doesnt prime, but then today i plugged in my boys p29 ecu and it started right up, so im guessing its just the ecu but not sure
Bfreefl
February 11th, 2009, 11:39 PM
anyone know
91REX
February 12th, 2009, 04:06 AM
If you plugged in alex's ECU and it worked fine it just might mean that the ecu is bad. You might want to get a chipped one from xenocron or something. I think they sell non vtec chipped ECUs for like 160.
J240sx
February 12th, 2009, 09:19 AM
take the cover off of the ECU and check to see if theres any burn spots or even smells burned, this may be a good indication of if being FRIED.
Bfreefl
February 14th, 2009, 09:42 PM
take the cover off of the ECU and check to see if theres any burn spots or even smells burned, this may be a good indication of if being FRIED.

yea thats what i did everything looked good though its from relentless rpm so i need to get in contact with them