Irr 3-12-08

[SickSVT]

Anyone heading out to IRR this Friday?

Me and a few friends are heading out with our Lightnings and one with a GTI, another with a bike.

I got my issues fixed, two blown spark plugs. So game on.
I might even hit the giggle gas just to make it a bit more fun. :SolidStraight:

[ISMELLRICE]

u mean 3/13? im not good with dates either lol...
ill have to check what movies are on that night...
i think "i love you man" comes out and i wanna see it

[SickSVT]

omg. owned by the calendar. yea. hahahahaha

[Jcook]

The jet powered cars are supposed to be there right? How much to get in the gate that night? No test and tune that night right?

[SickSVT]

For real?
Crap I better go check, I heard there was test and tune....
Damn it, way to piss on my parade, lol.... I better go check.

[SickSVT]

Nope jets are saturday


13th Test-n-Tune $15.00 Plus Grudge Racing Gates open at 5:30 pm

14th IHRA JET WARZ - plus **Reg. Bracket Racing gates open at 2:00 pm

http://www.immrace.com/VicIRR/schedule.htm

[J240sx]

tempting...very tempting. 50/50 I will be there.

[SickSVT]

I'm just looking for some people to run. first time at the track with this new setup, and considering I had a huge hole in my intake at the Dead Hookers 9 event, sucking in a ton of un-metered air that fried two spark plugs, I don't consider those good runs.
Re-plugged the intake, that shit ain't coming off now.

And I figured it would be more fun to run some people from the site vs some strangers.
don't care what it is, bikes welcome too, I love running them.

[Jcook]

Nope jets are saturday



http://www.immrace.com/VicIRR/schedule.htm

you is are correct;)

[ISMELLRICE]

shit, i wonder if i blew any spark plugs when that happened to me on friday...dont feel the car messing up or anything...

I'm just looking for some people to run. first time at the track with this new setup, and considering I had a huge hole in my intake at the Dead Hookers 9 event, sucking in a ton of un-metered air that fried two spark plugs, I don't consider those good runs.Re-plugged the intake, that shit ain't coming off now.

And I figured it would be more fun to run some people from the site vs some strangers.
don't care what it is, bikes welcome too, I love running them.

[JP]

Good to hear the intake is correctly plugged. I don't have anything to run yet. - We'll have the 'maro at runday sunday the 29th. If all is well after the first couple shake-downs then I'll turn the plate on, hit it about 250 and see if I can grenade the 12-bolt.

[SickSVT]

shit, i wonder if i blew any spark plugs when that happened to me on friday...dont feel the car messing up or anything...

you would know.... the motor pretty much breaks apart WOT. At least on V8's it does. But it can never hurt to pull the plugs and check. If your block is not built, you can do some serious damage.

LOL JP, I love the way you think..... Lord knows I like pushing shit till it pops. then just rebuild it bigger and badder.:wave:

[titter]

I iz too slow to race truck.

[SickSVT]

I iz too slow to race truck.

Oh come on now, I'm a heavy brick thats as aerodynamic as a billboard sign.:sadwavey: Think last time I weighed her in I was at 4800 lbs.
Of course its been awhile since It's been on the scales.

Plus no times on this setup, so who knows I might run a 7.8 :o

[Dylweed]

Oh come on now, I'm a heavy brick thats as aerodynamic as a billboard sign.:sadwavey: Think last time I weighed her in I was at 4800 lbs.
Of course its been awhile since It's been on the scales.

Plus no times on this setup, so who knows I might run a 7.8 :o

I say 9.2... and that's with a 75 shot.

[03scgt]

ill come out and run of 4lbs and ghetto ass street tires.im not expecting anything good but might as well get out of the house

[burny850]

i'll go if you go Ant

[SickSVT]

I say 9.2... and that's with a 75 shot.

Damn it I was thinking i might at least make the 8 second club.

[ISMELLRICE]

i never made it into that club lol...had a 9.001 and a 9.006 but immokalee never helped me out :(

[Jcook]

i never made it into that club lol...had a 9.001 and a 9.006 but immokalee never helped me out :(

did you get those times in the GT? that was my best with the GTO. I need the driver mod though.

[JP]

LOL JP, I love the way you think..... Lord knows I like pushing shit till it pops. then just rebuild it bigger and badder.:wave:

I'm sure that if it's going to let go, it's going to do it when I let go of the button so f* it! If I thought I could break it on the big end I'd be killing the squeeze after low gear. I won't put the blower motor in front of it anyhow. I may be dumb, but I'm not stupid.

Robert has Kooks headers now as well as a 26 spline input shaft and a new Spec flywheel eater for a clutch(cintered brass disc). He's talking about up-loading the race tune for Roy's dyno day and seeing how far north of 600 that thing is gonna go on the stock pulley. That thing is over 600 on the pump tune as is now. With the 1.52 it went a couple weekends ago driving through the clutch, I'm sure there's a 1.4 60' in it as is and a 6.x pass. - Then in goes an anti-roll and I'll see how far into the 1.3's I can tune his 60'.

[titter]

I would go, but I already know what I will run. The car is still stock, and will continue to run 8.50x, maybe a 8.4x until I get off my ass, and put some stuff on it. Besides 7.8x is still too fast for me lol.

[SickSVT]

lol. titter.
Shoot JP I'd be happy to get in the 600 club, I doubt I can without spray on my 93 octane tune. But I might spray it at roys on dyno day, we'll see.

[ISMELLRICE]

600! sounds like fun...

[03scgt]

yeah i hear the trucks weak without the spray,and to some its weak with it :D

[SickSVT]

shes just weak all around....... come on shes a pick up truck.... these things are used for hauling dirt, bricks, and dead bodys..... well not so much the bodies, the damn po po see them right off the bat... but there used for hauling. :p

[Randy 406]

How's the track prep on Friday nights? I've only been there on Saturdays, and Sundays. I know Sundays are hit, and miss. All you get is what's left over from Saturday night.

And a truck that weighs 4800 pounds DAMN! Makes me feel a little better at 3380.

[JP]

...at least this time I don't have to stand ready to catch a rod.........:ugh2:

Must be between the auto trans and the manifolds that's soaking up so much power. His went 584rwhp on the initial "soft" tune at 14psi with fairly big cams, but not blower cams.

Randy 3380? damb, that's heavy for an s-dime.

[SickSVT]

I'd kill to tip the scales at 3380, damn this thing would haul the mail with a quickness!

love your avatar btw Randy 406.

No rods this time Shagwell, but get ready for tranny pieces to be flung in your direction....

[titter]

Randy's truck is pretty bad ass... these are pictures I took of it.

http://mafia-motorsports.com/gallery/data/509/medium/CRW_2326.jpg
http://mafia-motorsports.com/gallery/data/509/medium/CRW_2332.jpg
http://mafia-motorsports.com/gallery/data/509/medium/CRW_2357.jpg
http://mafia-motorsports.com/gallery/data/510/medium/CRW_2444.jpg
http://mafia-motorsports.com/gallery/data/508/medium/CRW_2264.jpg

[JP]

^ damb, a long bed too. That doesn't help the weight bias any.....

As for track prep, it's hit or miss. The more high-end cars there are, the more they'll do.

[1loudGT]

I will be out of town. Would love to go and try and break into the 7s. Last time out there I went 8.00. I did hit the 7s in the 1/8th up in Bradenton last Saturday with a 7.96. Now i want to do it out at IRR. I will be there on runday sunday for sure.

[03scgt]

damn dan things gettin down there.get a stall in that beast and some 90/10's and mid 7's are around the corner

[1loudGT]

The gears helped out alot. The only thing I trap at 6100 rpms now and had the nitrous set to shut off at 5800. So I might have gotten a 12.2 instead of the 12.38 it ran but I'm good with that.

[ISMELLRICE]

damn i used to watch you whenever you only had nitrous i think...
im not sure if it was you but i was the guy that was selling the throttle body and plenum **Accufab** dont know if it was you or not

[SickSVT]

Damn that S-10 is bad ass looking.
Awesome photo's.

[JP]

^ oh shit, I just caught the shirt in your sig picture!:D

[SickSVT]

LOL

The boombastic is on there, as well as HP/TQ
And under her right breast is my 1/4 mile time.

I should be out at the track by 6 hopefully.
Got my new tune, not sure if I have enough nitrous left in the bottle to spray tonight, and no time to get her filled. So it might be a no spraying night, which sucks....

[03scgt]

LOL

The boombastic is on there, as well as HP/TQ
And under her right breast is my 1/4 mile time.

I should be out at the track by 6 hopefully.
Got my new tune, not sure if I have enough nitrous left in the bottle to spray tonight, and no time to get her filled. So it might be a no spraying night, which sucks....


if you want a full bottle for tonight pm frank.he'll swap you bottles because he fill's them

[ISMELLRICE]

they fill them there if im not mistaken...

[SickSVT]

Oh cool, wasnt sure if there was someone to fill em there on Friday nights. If so I'm golden.

Thats it for me, I cant stand to sit here at the office anymore, I gotta leave and get ready for hopefully a NPB tonight or maybe becoming another member of the
http://www.kwgrey.com/DH9/content/bin/images/large/DSC_0271.jpg

Hope to see a few of ya at the track tonight, and come say hi, I'm always game to run whoever, even if they are way more power than me and I know I'm gonna lose, its all fun either way to me.

[ISMELLRICE]

you have a sick ride regardless so whatever...
i might be over there maybe...

[DC2 T3G]

hey i seen you out there shag. but i was to busy fixing my honda all night and morning :) i threw on a set of slicks and ran a 7.8 hopefully with some more practice on them i can turn the time down some more.... But 7.8 im happy. I TOUCHED 7's!

[JP]

...so shaggy?

[SVT5.4]

Shaggy is very busy this week with work, sometimes not getting out until 3am. And then back to work at 8am.

He did get a new PB. I wouldn't tell but it may take a week for him to respond.

[JP]

Shaggy is very busy this week with work, sometimes not getting out until 3am. And then back to work at 8am.

He did get a new PB. I wouldn't tell but it may take a week for him to respond.

shitty. I'd give him a buzz, but it's not that important. - Glad to hear about the npb, now he needs to get to work on the suspension and get more of it to the ground.

[SVT5.4]

I think he trapped 101 on the last pass. All other passes were 94-96

[JP]

MPH doesn't mean nearly as much as ET. ET decides who gets there first.

[Sloww]

I'd kill to tip the scales at 3380, damn this thing would haul the mail with a quickness!

lmao

[SVT5.4]

Talked to him to day. He said 92-93mph. You are right about who gets there first, but 93/100mph is moving for a 4800lb truck.
Edit: 4800 lb brick in the wind.

[Randy 406]

That is flying,for that weight, and billboard front end. I thought my junk wasn't aerodynamic, his is damn near twice the size!

[JP]

Talked to him to day. He said 92-93mph. You are right about who gets there first, but 93/100mph is moving for a 4800lb truck.
Edit: 4800 lb brick in the wind.

That is flying,for that weight, and billboard front end. I thought my junk wasn't aerodynamic, his is damn near twice the size!


no doubt. I had a custom 2wd/lowered '81 K5 blazer with a 3.08/700r4/mildly worked 305 roller motor. If you look up brick in the dictionary, there's a picture of that body style. Suprisingly, that thing rode out pretty good from a 55-60mph roll, but that was because I could drop 2nd with the steep rear gears. I had that bitch up to 130 on a GPS one night on 417 coming into Orlando....yet another reminder of why I should be dead by now...

Randy - you going to runday sunday next weekend?

[Randy 406]

We should be there with my buddies Malibu. I'm waiting on few parts before I bring the truck back.

[JP]

I'm sure you've seen pics of our 'maro floating around between here and YB. Stop by and say Hi. - Most call me Jp.