my build for 2010 drift series

[iDriftS13]

Well most of you have seen my 180 heres what it used to look like...

http://i184.photobucket.com/albums/x185/idrifts13/DSC06775.jpg

well that was a few months ago.. due to some money problems i had to sell the stock sr20..

Sooooo here we go

i started everything off with :

complete 5 lug conversion
drilled and slotted rotors
new wheels 18x10 rear 18x9 front

Comming real soon :

rb25 swap
big ass turbo
powered by max hydro ebrake
4" exhaust ?
full cage?
bride seats?
well see as i go but i want to run in d1gp usa next year..

fresh pic.. rear fenders are pulled a good amount now with relativly no camber.. but still flush as fuck.. dont about worry the paint ive got plans for that also..

http://i43.tinypic.com/zvd2c7.jpg

[Hawk]

i was out running yesterday and saw the car, the ridiculousness of the wheels is even better in person.

[rotodouche]

the wheels look good. full cage is a must for florida pro series or anywhere if you want to tandem, so make that a priority. cant wait to slide with ya :thumbup:

[DSM JOEY]

good stuff! lmk if you need any help, you know i live right around the corner atm

[iDriftS13]

thanks guys.. yea motor will be here monday or tuesday.. so be looking for new pics of that.. ill be throwing on a greddy intake mani and doing the wiring next week !

[LUMBER BLACK]

Jamie I am proud of you kid. That is going to be a nice setup .

[David A]

Looks good. How about we go sliding in a week or two. :)

[iDriftS13]

Looks good. How about we go sliding in a week or two. :)


ahh i wish it would be done that fast.. lol but itll be a bit before i get all the nessesary components like a radiator, front mount, i need my driveshaft shortened, ect. but give me a bit and i will definatly hit you up..

[rotodouche]

Looks good. How about we go sliding in a week or two. :)

ill go.

[iDriftS13]

ill go.

miata sliding ? or did igor flake out?

[rotodouche]

i still have my car.

[iDriftS13]

word... motor should be here tommorrow..
teaser pic for now.

(this is the engine i will be recieving)
http://i44.tinypic.com/aneyo4.jpg

[rotodouche]

nice. what are you using to mount it?

[StealthFighter1]

looks like everyone's getting one of these.... i gotta start the "upgrading" on my rb....

[iDriftS13]

nice. what are you using to mount it?

im gonna go with a mount kit.. but ill beef them up with some 1/4" steel before they go in.. oh and probably some hockey puck mounts.

[iDriftS13]

looks like everyone's getting one of these.... i gotta start the "upgrading" on my rb....

yup im going with a greddy (style) intake before it goes in then some where close down the road ill be throwing on a very large turbo and ordering an AEM FIC piggy back and hopefully (if the injectors are big enough along with a z32 MAF) put down around 400-500 wheel.... that should keep up with daigo saito's chaser next year at D1 :D.. fbgm

[rotodouche]

+skill.

[iDriftS13]

+skill.

nigga i gots all kinds of skeels... i gots bow staff skeels and im pretty damn good with some nun chucks.. payowwwwww bitches

[iDriftS13]

UPDATES ! !

well i got the motor on monday its probably the cleanest most well taken care of engine ive gotten yet..no staining in the head, tranny looks brand new, and the turbo has absolutly no shaft play.. since then ive been cleaning and prepping it for the greddy intake and install into my 180.. I finished the wiring tuesday night.. took me a few hours but i got er' done and it came out real clean.. now for some pics !

http://i184.photobucket.com/albums/x185/idrifts13/motorpics002.jpg

http://i184.photobucket.com/albums/x185/idrifts13/motorpics003.jpg

http://i184.photobucket.com/albums/x185/idrifts13/motorpics004.jpg

my misc. parts pile.. most of this stuff wont be used beleive it or not..
http://i184.photobucket.com/albums/x185/idrifts13/motorpics005.jpg

wooo wiring all done !
http://i184.photobucket.com/albums/x185/idrifts13/motorpics006.jpg

[frank]

Sweet man, if you need any help shoot me a message.

[iDriftS13]

Sweet man, if you need any help shoot me a message.

word.. thanks ill let you know !

[rotodouche]

very nice, cant wait for it to be done. you should see the ghetto ass shit were talking about putting in my car lol. ill show you later.

[pdexta]

Looking awesome man. I can't wait to see it hit the streets.

The belts on that motor are crazy. I'd hate to break one, I think you'd be better off buying a new motor than trying to figure out how the hell to put it back on. :rofl1:
<input id="gwProxy" type="hidden"><!--Session data--><input onclick="jsCall();" id="jsProxy" type="hidden"><input id="gwProxy" type="hidden"><!--Session data--><input onclick="jsCall();" id="jsProxy" type="hidden">

[rotodouche]

lol theres only three. jamies a belt master after we replaced all of the shit on my fucking miata. that was awful.

[AminalPlanet]

that motor is so pretty!

[iDriftS13]

lol theres only three. jamies a belt master after we replaced all of the shit on my fucking miata. that was awful.

ugh my brain hurt for a week after that.. shit was nuts.. and yea the belts arent too crazy.. ordering the intake mani tonight (hopefully) check back for updates.. and idk if im feeling the crinkle red valve covers they might get changed aswell..

[iDriftS13]

very nice, cant wait for it to be done. you should see the ghetto ass shit were talking about putting in my car lol. ill show you later.


oooooooh do tell !

[YoungBlood]

^+1

[rotodouche]

well. im probably going to swap in the near future. but chisholm and i had an...interesting...idea when we were at the shop the other day. remember the blower from the miata? it may be getting some use. thats all ill say because it probably wont work.

[iDriftS13]

well. im probably going to swap in the near future. but chisholm and i had an...interesting...idea when we were at the shop the other day. remember the blower from the miata? it may be getting some use. thats all ill say because it probably wont work.


mhm SC single slam eh? nice..

[rotodouche]

perhaps. might get a CA for a back up lol.

[iDriftS13]

lol rb20's are rather cheap...

[David A]

Damn, your car is gonna be the shit.

[rotodouche]

lol rb20's are rather cheap...
i know. idk, well see what happens. im kinda keeping my options open (aka i have no fucking money and i still have to rebuild my miata first)

but your right lol im retarded, id def go with the rb20

[iDriftS13]

Damn, your car is gonna be the shit.

haha thanks.. i have big plans i just hope i can do everything i want on my budget..

[iDriftS13]

i know. idk, well see what happens. im kinda keeping my options open (aka i have no fucking money and i still have to rebuild my miata first)

but your right lol im retarded, id def go with the rb20

yup rb20 would be pretty cool... twin charged. :SolidStraight:

[rotodouche]

lol no, thats a nightmare waiting to happen

[iDriftS13]

well today i didnt really get shit done.. just changed the spark plugs and put the coolent neck back on.. should be ordering the intake tonight.. well see how that goes...

[iDriftS13]

WOO big update !

http://i184.photobucket.com/albums/x185/idrifts13/aemnigga002.jpg
Now we can do a little tunning.. :)

[iDriftS13]

well i ordered my intake manifold so it will be here soon... im guessing ill be ordering the mounts on friday or maybe this weekend.. stay tuned for updates

[Sick_Rider]

okay fuck this thread I'm ordering more parts ASAP.

[iDriftS13]

okay fuck this thread I'm ordering more parts ASAP.

hahaha.. it just looks like alot of parts..but really its not.. im poor :(

[Sick_Rider]

I'e been going parts crazy lately.

[iDriftS13]

Updates....

Intake mani should be in today.. i also ordered an r33 skyline radiator that should be in by thursday.. woo next up is mounts then intercooler then driveshaft.

[rotodouche]

nice!

[iDriftS13]

WOOO ! !

Everything you are about to see is either FTW or FTMFW unless stated otherwise.








































http://i184.photobucket.com/albums/x185/idrifts13/intake001.jpg

http://i184.photobucket.com/albums/x185/idrifts13/intake002.jpg

http://i184.photobucket.com/albums/x185/idrifts13/intake004.jpg

[iDriftS13]

radiator should be here any day.. next up is mounts and then we see if she'll start !

valve covers are pearl white btw.. it looks VERY NIIIIIICE ! < borat voice

[stevieg]

^ +1 on the valve cover

[iDriftS13]

^ +1 on the valve cover

thanks mang.. cant wait to get it running

[stevieg]

yea its going to be nice

[rotodouche]

damn homie. you do clean shit up well, thats for sure. cant wait to see it running

[Sick_Rider]

damn homie. you do clean shit up well, thats for sure. cant wait to see it running


fuck that i can't wait to see it being drift at an event.

[iDriftS13]

fuck that i can't wait to see it being drift at an event.


you and me both.. as soon as it gets done its getting trailered to countyline for some battle testing :D

[iDriftS13]

well i didnt really want to buy an rb into s13 downpipe so i took my old beatup sr20 down pipe and did some work...and photographed the whole shabangabang... enjoy..

first cut off the flange
http://i184.photobucket.com/albums/x185/idrifts13/DSC07067.jpg

next drill it out to fit the rb o2 housing
http://i184.photobucket.com/albums/x185/idrifts13/DSC07069.jpg

tack it up !
http://i184.photobucket.com/albums/x185/idrifts13/DSC07073.jpg

http://i184.photobucket.com/albums/x185/idrifts13/DSC07070.jpg

next run a full bead be careful not to catch yourself on fire...
http://i184.photobucket.com/albums/x185/idrifts13/DSC07076.jpg

clean up you work so everything flows nice
http://i184.photobucket.com/albums/x185/idrifts13/DSC07077.jpg

finished product !
http://i184.photobucket.com/albums/x185/idrifts13/DSC07078.jpg

[iDriftS13]

ordered my mounts and some other BS like relays and shit so stay tuned for an update with the motor in the car !!!

[stevieg]

nice work man

[MikeJones]

ftw. cant wait till this beast is running!

[iDriftS13]

ftw. cant wait till this beast is running!

dude im telling you im freaking out im so excited

[iDriftS13]

wooooo mounts are here.. hopefully the motor will go in this weekend..im gonna need a mhand seening that i broke my collar bone thursday night... again.. sooo stay tuned for updates and hit me up if you wanna help out

http://i32.tinypic.com/xlbd6h.jpg

[frank]

I'm down to help out, Kyle said you also wanted to borrow my hoist?

[rotodouche]

im gonna go help out too, dumbass has to go and get himself crippled right before he has to drop this beast in

[95w_bTEG]

this is looking beasty!

[iDriftS13]

I'm down to help out, Kyle said you also wanted to borrow my hoist?


yoooo yea i might need to borrow it if i cant borrow my buddies hoist...

[iDriftS13]

this is looking beasty!

thanks man

[ka-tdrifter]

damn son lookin good cant wait to see u slide that shit

[iDriftS13]

been goin back and fourth with AEM to figure out the last few details with softwear and wiring of their fuel ignition controller.... tommorrow ill be ordering my mishimoto radiator through BOOSTANDDESTROY.COM and then its intercooler (which i have lined up to buy next) and then driveshaft... its gettin close ! ! !

[Kris_TM]

LMK if you need any help man! I can't beleive i missed this thread lol Car is fucking Sick already, and it isn't even done!

[iDriftS13]

LMK if you need any help man! I can't beleive i missed this thread lol Car is fucking Sick already, and it isn't even done!


haha thanks man its killing me having the car sit out there with no motor..and have a motor sit in my garage.. but i just cant find time to put it in (not what she said) haha i was soposed to put it in this weekend but i won warped tour tickets off 99x and now my weekend is occupied lol... soon.. real soon

[Sick_Rider]

supaman dat HOOOOOO!!!!!

[marco]

thats it im DEFINATELY getting a 240 again. kyle do you still have that track s15 front s13? i miss my s13 so badly. just driving a 01 civic now. (BORING!!!!)

[S13BoosT]

Why would you put in an RB....I guess its mostly opinionated....I would rather have a lighter vehicle than a heavier...sliding is hard'er' to control with a heavier front end....

[iDriftS13]

Why would you put in an RB....I guess its mostly opinionated....I would rather have a lighter vehicle than a heavier...sliding is hard'er' to control with a heavier front end....


well an rb only weighs a little more than a KA.. and the weight distribution wont be an issue because i plan on getting the car corner balanced after it gets an alignment. Ive had 4 sr20's and done six or seven SR swaps for various people.. Its time for something new.. oh and putting down over 300 wheel without having to do any major engine upgrades is nice aswell..

[iDriftS13]

Engine is going in this weekend for sure so look for updates on sunday !

[iDriftS13]

http://www.youtube.com/watch?v=JIhgFu0U_VE
</EMBED></P>

[rotodouche]

thats it im DEFINATELY getting a 240 again. kyle do you still have that track s15 front s13? i miss my s13 so badly. just driving a 01 civic now. (BORING!!!!)

i do indeed. its not entirely track though. it should be out tomorow :thumbup:

[iDriftS13]

i do indeed. its not entirely track though. it should be out tomorow :thumbup:

dont sell it bitch we still need to go slide and im working my ass off and if you sell it before mine is done.... :tank:

[iDriftS13]

WOOOT ! @ # $ # #!@#@ The motor is in guys and it started up without any problems.. i must be good at something because this was just about as easy as an SR swap.. oh well.. i need an intercooler kit and my driveshaft shortened and then its on the street..

[stevieg]

nice pics

[marco]

yea definately want pics or vid or it didnt happen!

[rotodouche]

i dont plan on selling it

[iDriftS13]

yea definately want pics or vid or it didnt happen!

lmao you guys suck.. joey will post up a video in just a bit so stay tuned !

[iDriftS13]

ok heres a little taste of what went on saturday...

dont worry about the windsheild my dad threw a tire into it.. he wasnt happy about my tire stack in the garage..

http://i184.photobucket.com/albums/x185/idrifts13/Pugscars090.jpg

http://i184.photobucket.com/albums/x185/idrifts13/Pugscars091.jpg

then we ran into some problems
http://i184.photobucket.com/albums/x185/idrifts13/Pugscars093.jpg

the clutch master cylinder was in the way of the intake so i have to move it up or buy a smaller one
http://i184.photobucket.com/albums/x185/idrifts13/Pugscars092.jpg

done
http://i184.photobucket.com/albums/x185/idrifts13/Pugscars095.jpg

http://i184.photobucket.com/albums/x185/idrifts13/Pugscars094.jpg

[DSM JOEY]

<object width="560" height="340"><param name="movie" value="http://www.youtube.com/v/JJqHR8XsTlU&hl=en&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/JJqHR8XsTlU&hl=en&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="560" height="340"></embed></object>

[iDriftS13]

woooot you da man joe !

[AWDMadness]

congrats :)

[frank]

Leave it n/a.

[stevieg]

<object width="560" height="340"><param name="movie" value="http://www.youtube.com/v/JJqHR8XsTlU&hl=en&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/JJqHR8XsTlU&hl=en&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="560" height="340"></embed></object>

wow thats was fast now what about the BBQ vid

[DSM JOEY]

wow thats was fast now what about the BBQ vid

let me first figure out how to make such a nice video file a small size. The video of his start up is the RAW file. When i edited it, it went from 198 mb to 994 mb. Im trying to figure out why there is such a file size increase.. once i figure that out ill post the other stuff.. i have quite a lot of footage to go through.

[stevieg]

i was J/K

[Kris_TM]

let me first figure out how to make such a nice video file a small size. The video of his start up is the RAW file. When i edited it, it went from 198 mb to 994 mb. Im trying to figure out why there is such a file size increase.. once i figure that out ill post the other stuff.. i have quite a lot of footage to go through.

what program do you use and what do you render it as?

Youtube accepts a couple different formats as HD so you have some options on the size.

[iDriftS13]

whoa thread jack...

[frank]

whoa thread jack...

lawlz no one cares for your rb25 180, especially when there are rb26 e30's

http://www.onyxsyndicate.com/newman/e30gtr/img/coolantpipes01.jpg

[stevieg]

Lol

[iDriftS13]

lawlz no one cares for your rb25 180, especially when there are rb26 e30's



hey frank either stfu or gtfo ! :thumbup:

[frank]

Im just messing man, honestly that build started in like 12/06 so you've got him beat cause its still not done.

[iDriftS13]

Im just messing man, honestly that build started in like 12/06 so you've got him beat cause its still not done.

haha jfwy mang.. that car is sick tho ive been watching his build on zilvia

[DSM JOEY]

what program do you use and what do you render it as?

Youtube accepts a couple different formats as HD so you have some options on the size.

sony vegas 8

[marco]

damn. i miss my 240 so bad.........this is your fault. you know that right?



im yealous

[iDriftS13]

damn. i miss my 240 so bad.........this is your fault. you know that right?



im yealous

haha sry man.. mine has been sitting since january.. but good things come to those who wait i guess..

[frank]

haha sry man.. mine has been sitting since january.. but good things come to those who wait i guess..

How long till its on the street?

[iDriftS13]

How long till its on the street?

im hoping for next weekend.. ill get my intercooler this weekend and hopefully get some piping made.. frank can you weld aluminum? Im thinking about making my own piping..

[frank]

Nah man no spool gun on my mig so I cant push aluminum wire with out birdnesting it.

[rotodouche]

driveshaft in?

[marco]

free giving marco a 240 day? im pretty sure thats today.

[iDriftS13]

driveshaft in?

not yet mang.. its intercooler next.. and im working on it.. anyone think a 4 inch core would be too big? im trying to get it for 100 bucks its off a skyline..

[iDriftS13]

free giving marco a 240 day? im pretty sure thats today.

well marco if i had one laying around id definatly let you know..

[marco]

ok thakns meng. if you do end up having a shell or anything of the sort lmk! im in the market.and ill be in town in about a week

[iDriftS13]

ok thakns meng. if you do end up having a shell or anything of the sort lmk! im in the market.and ill be in town in about a week


word..


UPDATE ! picked up a greddy VSPL intercooler kit hella cheap ! driveshaft is next... hopefully ill have the car on the street next week ! w00t !

[frank]

Awesome man glad to see its coming along so quickly.

[marco]

sounds good man. keep it up. if you dont mind me asking. how much is all this costing you brother? and where did you start? just a shell or you had it all already?

[iDriftS13]

sounds good man. keep it up. if you dont mind me asking. how much is all this costing you brother? and where did you start? just a shell or you had it all already?


well i bought the shell for 2g's
i had the coilovers the steering wheel/ hub, and the RUCA's and exhaust

Ok well the 5 lug and wheels we will just say cost around 600.00.. thats hubs rotors, wheels and tires.

motorset 2150.00
TopHat rb25 into s13 mount kit 250.00
mishimoto rad 212.00
intercooler kit 275.00
intake mani 225.00
wiring done by me 0.00
and well just say 250.00 (on random trips to autozone)

so soo far around 6g's but you have to understand that this has been almost a year in the making.. i started saving for my motor in january. And i make alot of sacrifices.. this week ill be paying for gas in change i have laying around and i have absolutly no cash what so ever (because that intercooler and my GF cleaned out my wallet this weekend). And yes i do live at home with my rents so other than car insurance and occasionaly helping the rents out with the bills i dont have much to pay for but my car.. I really should be spending this money on school.. but thats why im trying to finish it so fast so i can start saving for school and moving out.. Its expensive but im addicted and to me its totaly worth it. I dont regret one bit of it..

[iDriftS13]

heres some pics of my intercooler set up.. i still need a hotpipe.

i still have alot of cleaning up to do...

http://i27.tinypic.com/accpih.jpg

http://i25.tinypic.com/jpx9ug.jpg

[stevieg]

its coming

[frank]

Such a clean bay, it sickens me. If you ever want to do some cheapo paint I have the foundation for a make shift booth now.

[iDriftS13]

Such a clean bay, it sickens me. If you ever want to do some cheapo paint I have the foundation for a make shift booth now.

nice.. yea as soon as im ready and have the paint ill let you know..

[marco]

i love the valve cover.

[rotodouche]

very nice. i have about the same in my car if you count everything in but its still single cam lol. cant wait until its on the road. are those darons wheels?

[iDriftS13]

very nice. i have about the same in my car if you count everything in but its still single cam lol. cant wait until its on the road. are those darons wheels?


hell naw nigguh these shits is mines.. Picked them up in miani..

UPDATE ! intercooler piping is finished and i had a MAFS problem that is now sorted out so the car runs perfect (within reason) and now im just waiting on this damn radiator and the d-shaft work... konichiwa bitches

[rotodouche]

nice. are you having that same drive shaft shortened or getting a new one? i might want that old one you had...it was one peice aluminum or something right?

[iDriftS13]

nice. are you having that same drive shaft shortened or getting a new one? i might want that old one you had...it was one peice aluminum or something right?

its a one peice steel but iirc it was only like 10-12 lbs.. but yea im getting mine shortened..

[marco]

bro im getting another 240 and its your fault. happy? you people are bad influences.



lmao

[iDriftS13]

bro im getting another 240 and its your fault. happy? you people are bad influences.



lmao


cool have fun with it ! hit me up when you wanna do a swap ill do it real cheap. lmk

[iDriftS13]

UPDATE !

The driveshaft is done.. Mickies driveline did an awsome job and it was surprisingly cheap too... heres some pics.

http://i184.photobucket.com/albums/x185/idrifts13/004.jpg

http://i184.photobucket.com/albums/x185/idrifts13/005.jpg

shit fits like a glove I'd recomend them to anyone.

[iDriftS13]

oh and if anyone is interested the length is 43 and 3/4 inches to the seal and 43 1/2" to the output shaft.

[MikeJones]

ahhh, this is guna be sick :thumbup:

joey get the camera ready lol

[YoungBlood]

im scared to see the end product...;)

[iDriftS13]

ahhh, this is guna be sick :thumbup:

joey get the camera ready lol

yes. The most epic footage shall ensue... ;)

[iDriftS13]

im scared to see the end product...;)

you should be... gto pshhhhhhhhh lol i just glad you didnt buy a miata.... :D

[iDriftS13]

UPDATE ! ! WOOOO i bought a clutch master that works.. its out of a 2000 nissan Xterra but hey it fits !

[AminalPlanet]

friggin a that is a long driveshaft.

[iDriftS13]

UPDATE ! ! ! IT MOVES ! ! I bled the clutch this morning and she is mobile... this radiator better be here by monday... i might be out at the meet on wednesday ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! omfg im excited.

[Kris_TM]

UPDATE ! ! ! IT MOVES ! ! I bled the clutch this morning and she is mobile... this radiator better be here by monday... i might be out at the meet on wednesday ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! omfg im excited.

what radiator are you using? a pic would be best. i have a couple dif ones that you could use till then if you want man.

[iDriftS13]

http://i27.tinypic.com/25h2004.jpg


torquey... HAHAHA

[iDriftS13]

what radiator are you using? a pic would be best. i have a couple dif ones that you could use till then if you want man.

thanks but no thanks mang.. ill be patient..

[Kris_TM]

nvm. alright well im excited to see this thing tear it up haha

[iDriftS13]

nvm. alright well im excited to see this thing tear it up haha

haha me too.. im thinking wednesday isnt gonna happen due to the fact that i need a windsheild.. so im gonna try and get it insured tomorrow and tell the insurance on monday that a tire fell off a truck or something.. lol

[Kris_TM]

haha me too.. im thinking wednesday isnt gonna happen due to the fact that i need a windsheild.. so im gonna try and get it insured tomorrow and tell the insurance on monday that a tire fell off a truck or something.. lol

it doesnt even matter for insurance
just tell them it is unsafe to drive and they will replace it

just make sure you atleast have comprehensive...

And fyi i have a rad. that will work just incase!! lol but wait. you've waited this long.

[marco]

cool have fun with it ! hit me up when you wanna do a swap ill do it real cheap. lmk
for sure. im definately getting a 14 and will more than likely go rb. ill let you know

[marco]

http://i27.tinypic.com/25h2004.jpg


torquey... HAHAHA
Z0Mg where did it go?!?!?!?!?


now....come to jville. theres a ton of 240's and everyone slides. do eetttttt

[iDriftS13]

Z0Mg where did it go?!?!?!?!?


now....come to jville. theres a ton of 240's and everyone slides. do eetttttt

niiice yea bro i think the farthest ill take it is maybe tampa.. possibly miami..

[marco]

so lets work something out. im probably getting a mint s14 if i can get my car sold....its so hard. the 240 was gone in a second and people were calling me an hour after i posted it. the civic is taking forever. i have to hunt people down now. haha. but if i get it how much would you charge for an rb25? and how long would it take? and of course what kind of quality would it be? ill be able to tell by yours obviously.

[iDriftS13]

so lets work something out. im probably getting a mint s14 if i can get my car sold....its so hard. the 240 was gone in a second and people were calling me an hour after i posted it. the civic is taking forever. i have to hunt people down now. haha. but if i get it how much would you charge for an rb25? and how long would it take? and of course what kind of quality would it be? ill be able to tell by yours obviously.

well to be honest im not too familiar with s14 wiring so youd want to send that out to be done (just to be on the safe side) and the price depends on what you want done... what motor what bolt ons ect...

[marco]

rb25, fmic, exhaust. thats about it. and make it clean. then i would probably turn the boost up later and make it a beast

[iDriftS13]

word... lmk when youre ready and well plan it out...

[marco]

for sure. gotta save up and sell shit first.

[rotodouche]

o snap. ive got a radiator you can use. im calling you back right now about your seat btw

[iDriftS13]

Cool I have aquired a drivers seat.. Cant beat 10 bucks with no rips.. Thanks Kyle

[rotodouche]

yep yep

[iDriftS13]

ugh... drivers side window motor took a shit.. blah the little shit kills me

[rotodouche]

me too. alternator is a bit fucked. i drove it today though and it was alright. suspension needs a little work and its low as fuck but other than that. even got a little sideways lol.

[YoungBlood]

either of you coming out wed.?:D

[iDriftS13]

not meeeeeeeee... :(

[YoungBlood]

haha, you got an ETA on that build completion?

[iDriftS13]

haha, you got an ETA on that build completion?

completion? shit probably next year.. but itll be on the street hopefully by this weekend

[iDriftS13]

UPDATE ! ! ! not a damn thing has changed since my last update.. and im not gonn make it out this weekend.. f'n a

[YoungBlood]

F'in Ay Cotton, F'in Ay.

[marco]

its all good broski. just be patient and take it easy. dont want to rush AT ALL. itll make it better when it actually does happen too! dont worry i might have something to go sliding with you pretty soon. lets get a group together

[iDriftS13]

its all good broski. just be patient and take it easy. dont want to rush AT ALL. itll make it better when it actually does happen too! dont worry i might have something to go sliding with you pretty soon. lets get a group together

definatly the more the better ! we need to rep FMR at the countyline and desoto events.

[Dingo]

nice 180! I hope one day my car can be this amazing :P

[iDriftS13]

nice 180! I hope one day my car can be this amazing :P

Thanks.. Whats done to your 240?

[iDriftS13]

UPDATE ! ! I uhhhh made a strut tower bar.. lol AND ! i fixed my window; 16 bucks at you pick and save got me a pre-owned window motor !

pics of the strut bar.. Its pretty beefy. should do a nice job..
http://i184.photobucket.com/albums/x185/idrifts13/100_1847.jpg

[Dingo]

Thanks.. Whats done to your 240?
Just springs+struts, strut bars, 5 lug conversion, HICAS front rack + sway bar
did you get that window motor off that white coupe?

[iDriftS13]

Just springs+struts, strut bars, 5 lug conversion, HICAS front rack + sway bar
did you get that window motor off that white coupe?

yes sir .

sounds like a pretty straight set up.. ever slide it?

[Dingo]

there goes my future power windows lol

I've tried sliding a little but sucking at it + having an open diff. doesn't work out very good lol

[iDriftS13]

there goes my future power windows lol

I've tried sliding a little but sucking at it + having an open diff. doesn't work out very good lol

umm well i only took the motor i left the regulator and the driver side still has the motor.. I think theyre the same on both sides.. but youd have to look into that.

I weld diffs ! only 50 bucks. lmk i have a diff sitting in my garage ill weld up if youre interested and you can just stop by my house and ill swap um out for ya..

[Dingo]

I was kidding about that lol, I don't need another thing that could break on my car :tongue: $50 to swap it with a welded one?

[iDriftS13]

$50 to swap it with a welded one?

yup.. Ill weld the one i have. put fresh diff oil in it and swap it out with yours. 50 bucks. lmk

[Dingo]

I'll get back to you on that because right now I don't have the cash thanks though

[iDriftS13]

no problem.. ill always have my welder so just hit me up when youre ready..

[rotodouche]

jamies welded diffs kick ass, def have him do it up.

[iDriftS13]

jamies welded diffs kick ass, def have him do it up.

word son.

[iDriftS13]

FINALY ! ! ! ! I stopped by chisholm's today and picked up my mishimoto radiator.. this shit is sick.. So i came home and slapped it in and filled er up and took it around the block.. Came back and HEY what do ya know? vaccum/boost leaks so i call up my boy Joey B. and he came to the rescue with a boost leak tester.. Fixed all of them i could find.. and hey i have more vaccum at idle but it still wants to occelate just like 2-300 rpm just every once in a while.. sooooo my quest for a rock solid idle continues and then ill put in my AEM FIC and take it to Todd to bump her up to 14lbs of boost and give it a slight tune.. Then its time to rock out.. Ive seen stock rb25's on 14lbs of boost + tune put down 325+ soo we will see what happens.. pics tomorrow.. sry guys

[Hawk]

i thought i heard that thing running around 4pm today....im off tomorrow if you want some quick snaps done.

[iDriftS13]

i thought i heard that thing running around 4pm today....im off tomorrow if you want some quick snaps done.

haha no more like 7 ish..and ill have to get back to you about the pics im going to see the gf this weekend.. so pm me your number and ill hit you up when i get back

[Devil Man]

you bastard.... haha i didnt know you got a rb25... grrr looks good.

also were is this shop that made the DS for you?

and do you ever go to the fri night meets in naples?

[iDriftS13]

you bastard.... haha i didnt know you got a rb25... grrr looks good.

also were is this shop that made the DS for you?

and do you ever go to the fri night meets in naples?


haha thanks.

mickies driveline off of fowler in fort myers.

not yet but i think ill have to make an appearence now..

[marco]

pics and vids please.


and 325 on stock rb25 with a slight twist FTMFW

[iDriftS13]

pics and vids please.


and 325 on stock rb25 with a slight twist FTMFW


soon.. soon

[rotodouche]

im jelous of your extra cylinders :biggrin

[iDriftS13]

im jelous of your extra cylinders :biggrin


oh and dont forget the .1 ltrs extra... :redspotd

[rotodouche]

well... thatll be changing...

did you get your windshield?

[iDriftS13]

lol not yet

[Devil Man]

um if you dont mind me asking what did they charge you for the DS. i want to start saving for 4 more cylinders and i am trying to get an idea of the cost of things.

[iDriftS13]

um if you dont mind me asking what did they charge you for the DS. i want to start saving for 4 more cylinders and i am trying to get an idea of the cost of things.

well i just modified an already complete 1 peice DS.. and they charged me 116.00.. soo im guessing they would charge in the 200.00 area to make you a complete new one..

give me those tailights ! ! ill trade you some oem 180sx tails.. they say 180sx and everything ! ! ooooooh super JDM ! !

[rotodouche]

they say 180sx and everything ! ! ooooooh super JDM ! !


hahahahahahaha

[Devil Man]

well i just modified an already complete 1 peice DS.. and they charged me 116.00.. soo im guessing they would charge in the 200.00 area to make you a complete new one..

give me those tailights ! ! ill trade you some oem 180sx tails.. they say 180sx and everything ! ! ooooooh super JDM ! !

lol um... eh that would look gay seeing as how it says 240sx on the side.

besides which sets are you talking about the new ones that i got on or the other ones that i am selling?

[iDriftS13]

new ones... but i guess ill sack up and spend the cash on some typex tails eventualy..

[rotodouche]

ive been looking at the origin tails. i think theyre pretty sick. not a priority, but ill do it at some point.

[iDriftS13]

ive been looking at the origin tails. i think theyre pretty sick. not a priority, but ill do it at some point.


ehh im not a big fan..




OHHHH AND BTW ! ! ! The car runs and drive perfect now.. i just need to get the AEM installed and put this bitch on the dyno..

[marco]

good for joo papo!

[iDriftS13]

good for joo papo!

thanks holmes !

[Kris_TM]

goood!!! look at the other thread! just in time bud!

[iDriftS13]

holy crap i havent been able to get on this site in like a week.. ok well i trimmed my rad support and squeezed the 2nd e-fan in with like a 1/4" on clearance between the fan and the p/s pulley lol.. pics tomorrow.

[ka-tdrifter]

damn bro its looking good. countyline event on sunday bro u gonna go?

[rotodouche]

i dont think he has a windshiled yet

[iDriftS13]

ok heres some pics of the recent progress.. lmk what you think.


fans are in and running.

http://i184.photobucket.com/albums/x185/idrifts13/fansandAEM001.jpg

VERY little fan to pulley clearance
http://i184.photobucket.com/albums/x185/idrifts13/fansandAEM002.jpg

and this happened today...
http://i184.photobucket.com/albums/x185/idrifts13/fansandAEM003.jpg

stay tuned for dyno pics,vids, and graphs soon.

[rotodouche]

very nice

[iDriftS13]

very nice

thanks mang

[Devil Man]

ooooh lookie there... aem.. is that dans? anywho looking good. i should be getting ma mega squirt this week i hope.. sigh..

[iDriftS13]

ooooh lookie there... aem.. is that dans? anywho looking good. i should be getting ma mega squirt this week i hope.. sigh..

no lol its not dans.. its an AEM FI/C its pretty much as close as you can get to a standalone while remaining a piggy back system.. picked it up for 125 ! lol they usualy go for around 450..

[iDriftS13]

Sorry guys no updates latly.. Ive been working on getting my suspension set up before i go get my alignment.. and i welded the diff on joeys 325is.. im hoping for insurance and alignment this weekend.

[iDriftS13]

update !

http://i184.photobucket.com/albums/x185/idrifts13/ballin001.jpg

[Devil Man]

YOU SUCK DICK

also while your sucking dick... did you get the key and lock? were the hell do you live? are you in naples or fort misery?


mmmm i guess i can see on your tag it says lee... so eh.. nevermind i was gonna come over and check that shit box out.

[iDriftS13]

YOU SUCK DICK

also while your sucking dick... did you get the key and lock? were the hell do you live? are you in naples or fort misery?


mmmm i guess i can see on your tag it says lee... so eh.. nevermind i was gonna come over and check that shit box out.


i live in NFM/ Cape coral.. kinda right on the city line.. lol youre welcome to come check it out if you want.. call me 239 699 4317

oh and no key/lock... lame i know but ill eventualy order one from courtesy nissan or something

[LUMBER BLACK]

I thought about buying those wheels from that guy on TR is that who you got your from?

[Devil Man]

meh dont get those wheels.... i dont know why you got them either jamie... but i know they are cheap and decent size and whatnot. them adr's look better imo and are just as well priced too.

[iDriftS13]

meh dont get those wheels.... i dont know why you got them either jamie... but i know they are cheap and decent size and whatnot. them adr's look better imo and are just as well priced too.


ehh well i picked them up pretty cheap and they fit nice and i can put big tires on them and still have a decent stretch.. so are you comming over today or what? lmk im bored as shit.. I already sealed the tails and fixed a little rust spot on the underneith of my hatch.. im running out of things to do.. lol

[iDriftS13]

I thought about buying those wheels from that guy on TR is that who you got your from?

yea theyre ok.. theyll work for now.. untill i get what i want.. 10's up front and 12's in the back :biggrin

[LUMBER BLACK]

I need a mouth hug if you are that bored LOL. get on your knees bitch

[Devil Man]

nah family is coming over and shit today.. kinda tired to from drinking last night.. i hear ya on the being bored thing and running out of shit to do well for me its more like running out of funds. kinda stinks i gotta wait a little to buy some more shit. but i did score a set of 440's for 40 bucks so couldnt pass that up.

also you didnt say if you got the 180 lock or not with the tails.. i wanted to play with one of them things and see if i could repin the lock to your cars key set... im sure i can do it i did it with the glove box and a house door lock too lol.. why not that one as well bwhahahaha i love thinkering with shit.

[Devil Man]

I need a mouth hug if you are that bored LOL. get on your knees bitch

BWHAHAHAHAHAHAHAAHAHAHAHAHA

so wrong so wrong.

[Anthony]

I need a mouth hug if you are that bored LOL. get on your knees bitch

dude mouth hug is epic :rofl1:

[iDriftS13]

quick pic of the fitment..

18x9 +22 front 18x10 +24 rear.. the front wheel is turned a bit but you get the idea

http://i184.photobucket.com/albums/x185/idrifts13/fitment.jpg

[iDriftS13]

I need a mouth hug if you are that bored LOL. get on your knees bitch

haha wtf im not that bored..

[Devil Man]

yea no the fitment is pretty good on them.. i just dont like how they have that reverse concave thing going on... but like i said for the price of them and there size cant complain really

[iDriftS13]

yea no the fitment is pretty good on them.. i just dont like how they have that reverse concave thing going on... but like i said for the price of them and there size cant complain really

yea theyre not my favorite by any means..

[Devil Man]

i need to buy a fucking front mount and fucking so much shit to get my car boosted... sigh i hate cars... did i mention that?

[Devil Man]

kneega we's in the chatbox... stop thread jacking your own thread.

[iDriftS13]

http://images.hollywood.com/cms/300x375/5241015.jpg

"Fartin in the tub and laughin your ass off? Fuckin moron. 2001, Sean Penn, I Am Sam; went full retard went home empty handed." YOU NEVER GO FULL RETARD !

[Devil Man]

http://images.hollywood.com/cms/300x375/5241015.jpg

"Fartin in the tub and laughin your ass off? Fuckin moron. 2001, Sean Penn, I Am Sam; went full retard went home empty handed." YOU NEVER GO FULL RETARD !

bwhahahahahaha what.

[rotodouche]

haha wtf im not that bored..

lulz

[iDriftS13]

bwhahahahahaha what.

dude you havent seen tropic thunder? lmfao watch it..

http://www.youtube.com/watch?v=ffEdO-UG4ZU

watch ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^

[DSM JOEY]

dude you havent seen tropic thunder? lmfao watch it..

http://www.youtube.com/watch?v=ffEdO-UG4ZU

watch ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^

2:30 seconds in**

[rotodouche]

this is the most epic ADD-filled build thread evar.

[iDriftS13]

this is the most epic ADD-filled build thread evar.


hahaha i had to keep it going some how.. lol

[Sick_Rider]

so i hope all this effort isn't wasted on you not really doing events and just doing donuts with David A

[iDriftS13]

so i hope all this effort isn't wasted on you not really doing events and just doing donuts with David A

Dude this time its different im going to try and attend every event i can possibly get my car to.. and you need to get your ass over here so you can slide with me..

[Sick_Rider]

Dude this time its different im going to try and attend every event i can possibly get my car to.. and you need to get your ass over here so you can slide with me..

Bring that thing to Cali.

[iDriftS13]

Bring that thing to Cali.


2010 zilvia is having a HUGE z/s-chassis convention and ill be there.. There isnt a set date, place, or time yet but im going regardless... Im guessing we can meet up then. Its soposed to be 2 track days and 1 meet/ show..

[Sick_Rider]

2010 zilvia is having a HUGE z/s-chassis convention and ill be there.. There isnt a set date, place, or time yet but im going regardless... Im guessing we can meet up then. Its soposed to be 2 track days and 1 meet/ show..


NO drifting NO josh.

[iDriftS13]

NO drifting NO josh.


ballsack.. well ill have to come out there.. lemme get some cash together and ill be there.. lol

[David A]

so i hope all this effort isn't wasted on you not really doing events and just doing donuts with David A

:rolleyes

[Sick_Rider]

:rolleyes


Drift!!!!!!!!! so i don't have to be so mean.

[Devil Man]

well anything new???

[iDriftS13]

well anything new???

nope nothin man.. just saving money for stupid BS i need to drive this thing.. like insurance, windshield, alignment, ect..

[Devil Man]

lame!

[POSmiata]

nope nothin man.. just saving money for stupid BS i need to drive this thing.. like insurance, windshield, alignment, ect..

Save up to put it on the insurance, wait like two weeks. And your insurance has to replace it without jacking up your rates. That's if you haven't already had a claim on a windshield for any of the other cars within the past 12 months.
That's how I got the windshield changed on my Eclipse 2 weeks after i got it.

[iDriftS13]

Save up to put it on the insurance, wait like two weeks. And your insurance has to replace it without jacking up your rates. That's if you haven't already had a claim on a windshield for any of the other cars within the past 12 months.
That's how I got the windshield changed on my Eclipse 2 weeks after i got it.


thats what im going to do...


oh and btw THE CAR IS INSURED !!@# my aligment apointment is tomorrow morning ! ! ! ! ! ! omfg im excited.

[DSM JOEY]

helped install the welded diff today. The car rides so much better with longer gears. And slides nicely. The car is a pretty solid beast

[iDriftS13]

Yup thanks for the help joe.. But after a tid bit of sliding to see if the whip was in good nic we started on our way back and about 5 seconds from my house it started missing... #2 coil pack went bad.. going to the JY tommorrow to yank one off an infiniti..

car slides like a champ.. i wanna take it to county line on friday.. !

[rotodouche]

friday? let me know. glad the other diff was better.

[DSM JOEY]

<object width="560" height="340"><param name="movie" value="http://www.youtube.com/v/oeicvnDa3JQ&hl=en&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/oeicvnDa3JQ&hl=en&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="560" height="340"></embed></object>

[Devil Man]

wow jamie man looking and sounding good.... and the car too. lol

[Tanya]

Nice! Tuning Tricks ftw.

[Sick_Rider]

Turning Tricks FTW!!!!!!

[Tanya]

Turning Tricks FTW!!!!!!

:rofl1:

[DSM JOEY]

runs were done @ 7-11psi w/ 10 degrees of timing

[Sick_Rider]

runs were done @ 7-11psi w/ 10 degrees of timing


Nobody cares about RB's its about EJ's now.

[iDriftS13]

Nobody cares about RB's its about EJ's now.

:rolleyes

[Mako18]

I say I say sh sh sh shame on you trying to pick on a supra with a fresh engine (750 miles). My bro and I saw you on del prado we were driving the white mkiiii going to get the new car around 9:45-10:00 last night. Your car sounds & looks good, nice work!!