PDA

View Full Version : Question about tranny...

Fuk_jdm
April 30th, 2006, 04:43 PM
I am having a problem. I tried to install the rear tranny bracket, and I cant. Its like it does not fit there. The holes dont line up. Whats the deal?

Also... the motor mounts that I got for the car is exactly for that swap, and I cant get the top trans mount... to fit. It does not match the patern. Am I missing another bracket or something?

Thanks...
Fuk_jdm
May 2nd, 2006, 12:54 AM
anyone?
96ekhatch
May 2nd, 2006, 02:30 PM
Arent the auto tranny mounts little different?? I think they are thats why when you put a manual tranny in a auto car you have to move that MM a little maybe you got the wrong ones on accident..The back one is a pain sometimes the tend to bend a little and makes it a pain. I always have put the two side ones in first then the back one..
Fuk_jdm
May 2nd, 2006, 04:45 PM
well what I am saying is... My car is Manual. The mounts.. are manual. BUT, none of the things match. I am thinking its because of the year of the tranny. The tranny is a 92, and the mounts, and everything are for a 94+ Would that make a diff?
96ekhatch
May 2nd, 2006, 07:15 PM
not if ther for a 94-95.. 96 plus yes it would matter. Maybe they gave you Dseries mounts... I am pretty sure all b series mounts and trannys match..
FMYStreetRacer
May 2nd, 2006, 10:02 PM
92 trans from a teg was cable, 94 is hydro. could see how they might be different but don't know for sure. i'll check.
96ekhatch
May 3rd, 2006, 01:46 PM
the mounts are the same for the cable and hydro...
TODD0341
May 3rd, 2006, 11:57 PM
The motor and tranny came from a model before 96 you said? It should fit, how far off are the holes? What if you loosened everything and supported the motor with a cherry picker until you got the entire assembly together and in the mounts? If you have the front motor mount and the one of the other tranny mounts attached already, the backside is a pain in the ass!!! Check out this site and it might be of some help to you

http://www.hondaswap.com/
Fuk_jdm
May 4th, 2006, 01:43 PM
the thing is that the mounts dont line up with the holes. I am trying to install it, and I think that i am missing a bracket or something. I dont get it. I contacted the mount company, and it is the Intergra stock mounts. All 5 of them. I dont know what it could be besides a bracket that is missing. I got the rear bracket, and that one I was able to make it fit. But the tranny mount on top... there is no way. thay are like an inch away from the wholes on the mount.